Add to my basket 
C7012012
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
2D PDF Drawing
Generate my PDF Datasheet
Generate Your PDF Datasheet for C7012012
Please select the product details you would like to include in the PDF.
Close
Accessory "protection"
C2306917
Pressure equalization element M6x0.030"
Pressure equalization elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalization element, 1 seal washer, 1 nut
CloseC2306917
Pressure equalization element M6x0.030"product added to your basket
light gray RAL 7035
IP 56
C2310917
Pressure equalization element M10x0.039"
Pressure equalization elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalization element, 1 seal washer, 1 nut
CloseC2310917
Pressure equalization element M10x0.039"product added to your basket
light gray RAL 7035
IP 56
C7100128
Security kit
To secure the enclosure against unauthorized access.
Supply 1 security kit
CloseC7100128
Security kitproduct added to your basket
Accessory "wall/holder"
C7100092
Wall-mounting brackets
Wall-mounting brackets made of plastic for external wall mounting. Installation above, below or laterally, as required.
Supply 4 wall-mounting brackets incl. fasteners
CloseC7100092
Wall-mounting bracketsproduct added to your basket
Accessory "screws"
C7100167
Screw 0.154" x 0.354"
For fitting standard DIN rails, mounting plates, PCBs, components etc.
Supply 1 self-tapping screw
CloseC7100167
Screw 0.154" x 0.354"product added to your basket
Accessory
C7111056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply 1 mounting plate
CloseC7111056
Mounting plateproduct added to your basket
C7111077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 1.378" x 0.295". For mounting terminal blocks and components in the enclosure.
Supply 1 standard DIN rail TH 35
CloseC7111077
Standard DIN rail, Type TH 35product added to your basket
4.09″x1.38″x0.30″
C7111087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 0.591" x 0.217". For mounting terminal blocks and components in the enclosure.
Supply 1 standard DIN rail TH 15
CloseC7111087
Standard DIN rail, Type TH 15product added to your basket
4.09″x0.59″x0.22″
Customizing options for C7012012
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
Material
Color
light gray RAL 7035
Standards
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Length
4.803″
122 mm
Width
3.228″
82 mm
Height
2.165″
55 mm
PCB length, base
3.583″
91 mm
PCB width, base
2.874″
73 mm
Keypad length
3.848″
97.75 mm
Keypad width
2.274″
57.75 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)
- PDF-File (without registration) 345 KB
- AutoCAD DWG-File 736 KB
- AutoCAD DXF-File 2,770 KB
Weight/1 part
179 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Germany