Accessories for enclosures
Add to my basket Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 bottom panel with snap-in strips.
1 base – desk-top/wall –
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel with snap-in strips.
1 base – desk-top/wall –
System components to complete
B4042407
Cover S
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply 1 cover, assembly kit
CloseB4042407
Cover Sproduct added to your basket
off-white RAL 9002
7.48″x5.31″x0.55″
B4042707
Bottom part S flat, version I
Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting cover or aluminum front panel (sep. article)
Supply 1 bottom part flat
CloseB4042707
Bottom part S flat, version Iproduct added to your basket
off-white RAL 9002
7.48″x5.31″x0.96″
IP 54 opt.
B4042717
Bottom part S flat, version II
Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting ABS front panel or glass panel (sep. article)
Supply 1 bottom part flat
CloseB4042717
Bottom part S flat, version IIproduct added to your basket
off-white RAL 9002
7.48″x5.31″x0.96″
IP 54 opt.
B4042757
Bottom part S high, version I
Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting cover or aluminum front panel (sep. article)
Supply 1 bottom part high
CloseB4042757
Bottom part S high, version Iproduct added to your basket
off-white RAL 9002
7.48″x5.31″x1.36″
IP 54 opt.
B4042767
Bottom part S high, version II
Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting ABS front panel or glass panel (sep. article)
Supply 1 bottom part high
CloseB4042767
Bottom part S high, version IIproduct added to your basket
off-white RAL 9002
7.48″x5.31″x1.36″
IP 54 opt.
B4042847
Base S - desk-top/wall -
Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.
Supply 1 base, 2 clips, assembly kit
CloseB4042847
Base S - desk-top/wall -product added to your basket
off-white RAL 9002
4.84″x4.84″x2.09″
B4142106
Front panel S
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply 1 front panel, assembly kit
CloseB4142106
Front panel Sproduct added to your basket
matt anodized
7.34″x5.18″x0.08″
B4142107
Front panel S
Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.
Supply 1 front panel, assembly kit
CloseB4142107
Front panel Sproduct added to your basket
off-white RAL 9002
7.50″x5.34″x0.57″
B4142203
Glass panel S
Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.
Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean
Supply 1 glass panel incl. mounting frame and adhesive foil
CloseB4142203
Glass panel Sproduct added to your basket
clear
7.50″x5.34″x0.66″
Accessory "protection"
B4142005
Sealing S (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply 1 sealing
CloseB4142005
Sealing S (bottom part - front design)product added to your basket
B4142006
Sealing S (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
-bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
-bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply 1 sealing
CloseB4142006
Sealing S (bottom part - base/bot. panel/bat. comp...)product added to your basket
