Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 battery compartment and lid.
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 battery compartment and lid.
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4144047
Battery compartment and lid M, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
Close
Battery compartment and lid M, 5 x AA
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Accessory
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, male
product added to your basket
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, female
product added to your basket
gold-plated
Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 bottom panel with handle recess.
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel with handle recess.
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4144167
Bottom panel with handle recess M
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
Close
Bottom panel with handle recess M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Accessory
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, male
product added to your basket
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, female
product added to your basket
gold-plated
Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 battery compartment and lid or bottom panel with recess.
1 base – station for mobile case –
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 battery compartment and lid or bottom panel with handle recess.
1 base – station for mobile case –
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4044837
Base M - charging station, case deposit mobile
Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.
Supply
1 base, 1 base cover, 2 covers, assembly kit
Close
Base M - charging station, case deposit mobile
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
6.02″x6.02″x2.76″
B4144047
Battery compartment and lid M, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
Close
Battery compartment and lid M, 5 x AA
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
B4144167
Bottom panel with handle recess M
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
Close
Bottom panel with handle recess M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Accessory
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, male
product added to your basket
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, female
product added to your basket
gold-plated
Minimum components
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 battery compartment and lid or 1 bottom panel with handle recess.
1 wall suspension element.
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 battery compartment and lid or 1 bottom panel with handle recess.
1 wall suspension element.
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4144047
Battery compartment and lid M, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
Close
Battery compartment and lid M, 5 x AA
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
B4144167
Bottom panel with handle recess M
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
Close
Bottom panel with handle recess M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
B4144247
Wall suspension element M
Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.
Supply
1 wall suspension element with snap-in mechanism
Close
Wall suspension element M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Accessory
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, male
product added to your basket
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Close
Contacts, female
product added to your basket
gold-plated
Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 base – desk-top –
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 base – desk-top –
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4044827
Base M - desk-top -
Assembly unit: for case combinations with open bottom part vers. I or II. Case screwed to base. Assembly screws hidden from view. Ergonomically designed for operating and reading off. Assembly of the operating panel vertically or horizontally, depending on the application, see assembly instruction.
Supply
1 base, 2 covers, assembly kit
Close
Base M - desk-top -
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
6.02″x6.02″x2.48″
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Minimum components (for single parts)
1 bottom part, vers. I.
1 front design (cover or front panel Al).
1 bottom panel with snap-in strips.
1 base – desk-top/wall –
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel with snap-in strips.
1 base – desk-top/wall –
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4044847
Base M - desk-top/wall -
Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.
Supply
1 base, 2 clips, assembly kit
Close
Base M - desk-top/wall -
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
6.02″x6.02″x2.48″
B4144257
Bottom panel with snap-in strips M
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
Close
Bottom panel with snap-in strips M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Minimum components
1 bottom part, vers. I.
1 front design (cover).
1 bottom panel.
1 installation assembly kit.
or
1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel.
1 installation assembly kit.
System components to complete
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part flat
Close
Bottom part M flat, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.00″
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminum front panel (sep. article)
Supply
1 bottom part high
Close
Bottom part M high, version I
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
8.86″x6.50″x1.40″
IP 54 opt.
B4144257
Bottom panel with snap-in strips M
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
Close
Bottom panel with snap-in strips M
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
B4144587
Installation assembly kit M, flat
For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.
Version
Holders matches bottom part, flat
Supply
4 holders, assembly kit, design frame
Close
Installation assembly kit M, flat
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
10.71″x8.58″
B4144597
Installation assembly kit M, high
For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.
Version
Holders matches bottom part, high
Supply
4 holders, assembly kit, design frame
Close
Installation assembly kit M, high
product added to your basket
ABS
(UL 94 HB)
off-white RAL 9002
10.71″x8.58″
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).
Supply
1 sealing
Close
Sealing M (bottom part - front design)
product added to your basket
SEBS (TPE)
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
Close
Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)
Customizing options for B4144106
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
Accessories for enclosures
Add to my basket 
